精心制作書用料可分為脊面同料和脊面異料兩種。
The materials for elaborately making books can be divided into two types: the same materials on the ridge and different materials on the ridge.
1、脊面同料，即書脊和封面封底采用整片的同一種材料制成。有方脊和圓脊兩種。精心制作面料多用紙、織物、漆紙、漆布等，一般都配有護封。但有一種全紙面印有書名、圖案等并壓膜裱糊在硬紙板上，這種書多為方脊不帶護封。
1. The ridge surface is made of the same material, that is, the spine and the cover and back cover are made of the same material. There are square ridge and round ridge. Elaborate fabrics, multi-purpose paper, fabric, lacquer paper, lacquer cloth, etc. are generally equipped with protective covers. However, there is a kind of full paper printed with book title, pattern, etc. and laminated on cardboard. Most of these books are square ridges without protective cover.
2、脊面異料，即書脊和封面用不同材料制成，通常以織物作書脊，以紙張裱糊在硬紙版上作封面，這種形式一般多為圓脊不帶護封。
2. Ridge surface different materials, that is, the spine and cover are made of different materials. Usually, the fabric is used as the spine and the paper is pasted on the hard paper plate as the cover. This form is generally round ridge without protective cover.
精心制作封皮襯紙用什么膠粘?
What kind of adhesive is used to make the cover lining paper carefully?
精心制作書與平裝書主要區別就在于書的封面不同。平裝書的封面為軟封面，精心制作書的封面為硬封面，稱為書殼。書殼通常由三層材料（也有多層的）組成。外層封皮由涂料紙、亞麻、涂布、絲綢、棉紡等材料制成。畫冊設計里層為襯紙，印有實地色、圖案或?yàn)榘滓r紙。襯紙與書芯一起釘裝，將書芯與書殼連為一體。在封皮與襯紙之間是一層厚度為1.5mm～3.5mm的紙板，它由三塊紙板拼成。精心制作書的釘裝關鍵就在于書殼的制作，而組成書殼的各部分材料尺寸合適與否直接影響到整書的質量。
The main difference between an elaborate book and a paperback book is that the cover of the book is different. The cover of a paperback book is a soft cover, and the cover of a carefully made book is a hard cover, which is called a book case. The book case is usually composed of three layers of material (or multiple layers). The outer cover is made of coating paper, linen, coating, silk, cotton and other materials. The inner layer of the album design is backing paper, printed with field color, pattern or white backing paper. The backing paper and the book block are nailed together to connect the book block and the book case as a whole. Between the cover and the backing paper is a layer of paperboard with a thickness of 1.5mm ~ 3.5mm, which is composed of three paperboards. The key to the nailing of carefully made books lies in the production of the book case, and whether the material size of each part of the book case is appropriate or not directly affects the quality of the whole book.
精心制作書分為圓背精心制作和方背精心制作。精心制作書的書殼通常比書芯略大2～4mm，其大出部分稱為飄口。它可以起到畫冊設計保護書芯的作用、且顯得美觀大方。
Elaborate books are divided into round back elaborate and square back elaborate. The carefully made book case is usually 2 ~ 4mm larger than the book block, and the larger part is called floating mouth. It can play the role of album design to protect the book block, and it is beautiful and generous.
精心制作書的裝訂工藝 一、 流程為: 書芯的制作→書殼的制作→上書殼 （一）書芯的制作 書芯制作的前一部分和平裝書裝訂工藝相同，包括：裁切、折頁、配頁、鎖線與切書等。在完成上述工作之后，就要進行精心制作書芯更復雜的加工過程。書芯為圓背有脊形式，可在平裝書芯的基礎上，經過壓平、刷膠、干燥、裁切、扒圓、起脊、刷膠、粘紗布、再刷膠、粘堵頭布、粘書脊紙、干燥等完成精心制作書芯的加工。書芯為方背無脊形式，就不需要扒圓。書芯為圓背無脊形式，就不需要起脊。
The binding process of carefully made books I. the process is: production of book block → production of book case → production of upper book case (I) book block. The former part of book block production is the same as that of plain bound books, including cutting, folding, page matching, sewing and book cutting. After completing the above work, it is necessary to carefully make the book block more complex processing process. The book block is in the form of round back with ridge. On the basis of paperback book block, carefully making book block can be completed through flattening, glue brushing, drying, cutting, round raking, ridging, glue brushing, gauze sticking, glue brushing, plug cloth sticking, spine paper sticking, drying, etc. The book block is in the form of square back without ridge, so there is no need to pick a circle. The book block is in the form of round back without ridge, so there is no need for ridge.
1. 壓平 壓平是在專用的壓書機上進行，使書芯結實、平服，提高書籍的裝訂質量。
1. Flattening is carried out on a special book press to make the book block firm and flat, and improve the binding quality of books.
2.刷膠 用手工或機械刷膠，使書芯達到基本定型，在下道工序加工時，書帖不發生相互移動。
2. Brush glue manually or mechanically to make the book block reach the basic setting. During the next process, the book posts will not move each other.
3、裁切 對刷膠基本干燥的書芯，進行裁切，成為光本書芯。
3. Cut the book block that is basically dry with glue brush, and cut it to become a light book block.
4、扒圓 由人工或機械，把書脊背脊部分，處理成圓弧形的工藝過程，叫做扒圓。扒圓以后，整本書的書貼能互相錯開，便于翻閱，提高了書芯的牢固程度。
4. Round raking is a process in which the back part of the book spine is processed into an arc shape manually or mechanically, which is called round raking. After rounding, the book stickers of the whole book can be staggered with each other, which is easy to read and improves the firmness of the book block.
5.起脊 由人工或機械，把書芯用夾板夾緊加實，在書芯正反兩面，接近書脊與環襯連線的邊緣處，壓出一條凹痕，使書脊略向外鼓起的工序，叫做起脊，這樣可防止扒圓后的書芯回圓變形。
5. Ridging is a process of manually or mechanically clamping and compacting the book block with a splint, pressing out a dent on the front and back sides of the book block, close to the edge of the line between the book ridge and the ring lining, so as to make the book ridge bulge slightly outward, which is called ridging, so as to prevent the book block from rounding and deformation after rounding.
6.書脊的加工 加工的內容包括：刷膠、粘書簽帶、貼紗布、貼堵頭布，貼書脊紙。 貼紗布能夠增加書芯的連結強度和書芯與書殼的連結強度。 堵頭布，貼在書芯背脊的天頭和地腳兩端，使書帖之間緊緊相連，不僅增加了書籍裝訂的牢固性，又使書變得美觀。 書脊紙一定得貼在書芯背脊中間，不能起皺、起泡。
6. The processing of spine includes: brushing glue, pasting bookmark tape, pasting gauze, pasting plug cloth and pasting spine paper. Sticking gauze can increase the connection strength of the book block and the connection strength between the book block and the book case. The capping cloth is pasted on both ends of the crown and the foot of the back of the book block, so that the books are closely connected, which not only increases the firmness of book binding, but also makes the book beautiful. The spine paper must be pasted in the middle of the back of the book block without wrinkling or blistering.
（二） 書殼的制作 書殼是精心制作書的封面。書殼的材料應有一定的強度和耐磨性，并具有裝飾的作用。 用一整塊面料，將封面、封底和背脊連在一起制成的書殼，叫做整料書殼。封面、封底用同一面料，而背脊用另一塊面料制成的書殼，叫做配料書殼。 作書殼時，先按規定尺寸裁切封面材料并刷膠，然后再將前封、后封的紙板壓實、定位（稱為擺殼），包好邊緣和四角，進行壓平即完成書殼的制作。由于手工操作效率低，現改用機械制書殼。 制做好的書殼，在前后封以及書背上，壓印書名和圖案等。為了適應書背的圓弧形狀，書殼整飾完以后，還需進行扒圓。
（2） The making of book case the book case is the cover of a carefully made book. The material of the book case should have certain strength and wear resistance, and have the function of decoration. A book case made of a whole piece of fabric connecting the cover, back cover and spine is called a whole book case. A book case made of the same fabric for the front cover and back cover and another fabric for the back is called an ingredient book case. When making a book case, first cut the cover material according to the specified size and brush glue, then compact and position the front and rear sealing paperboards (called swing case), wrap the edges and corners, and press flat to complete the production of the book case. Due to the low efficiency of manual operation, we now use mechanical book cases. The title and pattern of the book are embossed on the front and back seals and the back of the book. In order to adapt to the arc shape of the back of the book, the book case needs to be rounded after finishing.
（三） 上書殼 把書殼和書芯連在一起的工藝過程，叫做上書殼，也叫套殼。 上書殼的方法是：先在書芯的一面襯頁上，涂上膠水，按一定位置放在書殼上，使書芯與書殼一面先粘牢固，再按此方法把書芯的另一面襯頁也平整地粘在書殼上，整個書芯與書殼就牢固地連結在一起了。后用壓線起脊機，在書的前后邊緣各壓出一道凹槽，加壓、烘干，使書籍更加平整、定型。
（3） The process of connecting the book case and the book block together is called the upper book case, also known as the sleeve case. The method of putting on the book case is: first, apply glue on the lining page on one side of the book block, and place it on the book case according to a certain position, so that one side of the book block and the book case can be firmly adhered, and then the lining page on the other side of the book block can be smoothly adhered to the book case according to this method, so that the whole book block and the book case can be firmly connected. After that, use the crimping and ridging machine to press out a groove on the front and rear edges of the book, pressurize and dry, so as to make the book more flat and shaped.
如果有護封，則包上護封即可出廠。 精心制作書，裝訂工序多，工藝復雜，用手工操作時，操作人員多、效率低。目前采用精心制作聯動機，能自動完成書芯供應、書芯壓平、刷膠烘干、書芯壓緊、三面裁切、書芯扒圓起脊、書芯刷膠粘紗布、粘卡紙和堵頭布、上書殼、壓槽成型、書本輸出等精心制作書的裝訂工藝。 我國生產的JZX－01型精心制作書籍裝訂自動生產線由供書芯機、書芯壓平機、刷膠烘干機、書芯壓緊機、書芯堆積機、三面切機、扒圓起脊機、輸送反轉機、書芯貼背機、上書殼機、壓槽成型機等單機，按上述順序排列組成。
If there is a protective seal, the package can leave the factory. The book is carefully made, with many binding processes and complex process. When it is operated manually, there are many operators and low efficiency. At present, the elaborate linkage machine is adopted, which can automatically complete the book binding process of elaborate books, such as book block supply, book block flattening, glue brushing and drying, book block compression, three-sided cutting, book block rounding and ridging, book block brushing adhesive gauze, adhesive card paper and plug cloth, upper book case, groove forming, book output, etc. The jzx-01 elaborate book binding automatic production line produced in China is composed of single machines such as book core feeder, book core flattening machine, glue brushing dryer, book core compactor, book core stacker, three side cutter, rounding ridging machine, conveying reversing machine, book core sticking back machine, book shell machine and grooving forming machine, which are arranged in the above order.
精心制作書與平裝書的區別
The difference between an elaborate book and a paperback book
精心制作書和平裝書的主要區別在裝訂方面。平裝書就是我們平常一般用的書，比如教材什么的，一般采用膠訂工藝，即用特種裝訂用的膠將書的內頁各印張粘在一起，再和封面粘在一起就可以了，一般用專門的膠訂機器。封面就是一般的銅版紙什么的，比內頁厚一些，整本書是可以彎折的，可以握在手里。而精心制作書的內頁一般是采用鎖線工藝，就是用線將內頁鎖在一起，再粘上膠，這樣比較結實，不愛掉頁。
The main difference between elaborate books and paperback books is in binding. Paperback books are books we usually use, such as teaching materials. Generally, binding technology is adopted, that is, the inner pages of the book are pasted together with special binding glue, and then pasted together with the cover. Generally, special binding machines are used. The cover is ordinary coated paper or something. It is thicker than the inner page. The whole book can be bent and held in your hand. The inner pages of carefully made books are generally locked with thread, that is, the inner pages are locked together with thread, and then glued with glue, which is more solid and does not love to lose pages.
封皮一般為硬紙板的，將印刷精美的薄紙糊在硬紙板上形成書皮，再將內頁粘在書殼上。精心制作書是不能彎折的，看上去檔次也高，一般因有硬皮顯得很厚重、精美。
The cover is generally made of cardboard. The beautifully printed tissue paper is pasted on the cardboard to form the book cover, and then the inner page is pasted on the book case. Carefully made books can't be bent. They look high-grade. Generally, they look very thick and exquisite because of their hard skin.
The above is Jinan hardcover book production http://wwwsonystyle.com.cn Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
濟南華政印務有限公司
