1、平訂。缺點是時間久了釘子要銹蝕，從而導致畫冊書頁松散，已經被使用的很少了。再一個缺點，平訂須占用一定寬度的訂口，也就是說訂的位置和書籍有個距離，使書頁只能呈“不完全打開”形態，翻閱不太方便，一般適用于300多頁以下的冊子。
1. Flat order. The disadvantage is that the nails will rust over a long time, resulting in loose pages of the album, which has been rarely used. Another disadvantage is that the flat binding must occupy a certain width of the binding opening, that is, there is a distance between the binding position and the book, so that the page can only be in the form of "incomplete opening", which is not convenient to read. It is generally suitable for books with more than 300 pages.
2、騎馬訂。書頁依靠2個鐵絲釘聯結，和平常大家用的訂書器的釘子差不多，在畫冊印刷中，騎馬訂相對比較便宜，不過不太適合太厚的畫冊，一般來說28頁以內的數量已經很厚了了，厚的冊子用騎馬訂不顯檔次的。
2. Horse riding order. The book pages are connected by two iron nails, which is similar to the nails of the stapler we usually use. In the printing of picture books, the price of horse riding is relatively cheap, but it is not suitable for too thick picture books. Generally speaking, the quantity within 28 pages is already very thick, and the thick books are not high-grade.
3、鎖線訂。又叫串線訂，書芯雖然比較牢固，但由于書背上訂線較多，導致平整度較差。
3. Sewing. It is also called string binding. Although the book block is relatively firm, the flatness is poor due to more binding lines on the back of the book.
4、無線膠訂。無線膠訂的**非常好，目前，大量的畫冊印刷都采用這種裝訂方式。但由于熱熔膠質量沒有相應的行業標準或**標準，使用方法還不規范，故膠訂書籍的質量尚沒有達到令人滿意的程度，一些質量不好的熔膠時間沒多久*干裂了，特別北方干燥，書整個*散架了，所以條件允許，書籍的保存時間要求長久的情況下，可特別提出要質量好的熔膠。
4. Wireless binding. The performance of wireless binding is very good. At present, a large number of picture album printing adopt this binding method. However, as there is no corresponding industry standard or * * standard for the quality of hot melt adhesive and the use method is not standardized, the quality of bound books has not reached a satisfactory level. Some poor quality melt adhesive has not been dry for a long time, especially in the north, and the whole book has been scattered. Therefore, if conditions permit and the storage time of books is required to be long, it can be specially proposed to have high-quality melt adhesive.
5、鎖線膠背訂。又叫鎖線膠訂，過程是先鎖線再上膠，上膠時不再銑背。這種裝訂方法裝出的冊子結實且平整，目前使用這種方法的書籍也比較多。
5. Sewing glue back binding. It is also called sewing and binding. The process is to lock the thread first and then glue it. When gluing, there is no milling back. The booklets packed by this binding method are solid and flat, and there are many books using this method at present.
6、塑料線燙訂。目前這種方式是屬于比較優良的裝訂方式，其特點是書芯中的書帖經過兩次黏結，前一次黏結的作用是將塑料線訂腳與書帖紙張黏合，使書帖中的書頁得以固定;后一次黏結是通過無線膠黏訂將塑料線燙訂的書芯黏結成書芯，這種辦法訂成的書芯非常牢固，并且由于不用銑背打毛，減少了膠質不良對裝訂質量的影響。目前國內印刷廠用的也不是太多。。
6. Plastic thread ironing. At present, this method is an excellent binding method, which is characterized in that the book post in the book block is bonded twice. The function of the previous bonding is to bond the plastic thread binding foot with the book post paper, so that the book pages in the book post can be fixed; The latter binding is to bind the book block ironed with plastic wire into a book block through wireless adhesive binding. The book block made by this method is very firm, and because there is no need to mill the back and roughen, the impact of poor glue on the binding quality is reduced. At present, domestic printing plants do not use too much..
The above is a detailed introduction to the production of hardcover books in Jinan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://wwwsonystyle.com.cn/
濟南華政印務有限公司
